Material: Stainless steel (electropolished)
Material of diaphragm / check balls / seals: TPV (EPDM-PP) + TFM (PTFE) / PTFE / PTFE
Centre block material: Polypropylene glass fibre reinforced (PP)
Description of material: EPDM = ethylene propylene diene rubber, FPM = fluorine rubber,
NBR = acrylonitrile butadiene rubber, PP = polypropylene, PTFE = polytetrafluoroethylene,
TPC-ET + TFM (PTFE) = thermoplastic polyester elastomer + modified polytetrafluoroethylene,
TPV (EPDM-PP) = EPDM/PP compound
The double diaphragm pump is suitable for the food and pharmaceutical industry as well as for emptying drums, IBCs and tanks.
| Doppelmembranpumpen (Werkstoff): | Metall |
| 房屋（材料）: | Edelstahl 1.4404 (316 L) elektropoliert |
| Mittelblock (Werkstoff): | Polypropylen glasfaserverstärkt (PP) |
| 膜片（材料）: | TPV (EPDM-PP) + TFM (PTFE) (EPDM/PP-Compound + Modifiziertes Polytetrafluorethylen) |
| 阀球（材料）: | PTFE (Polytetrafluorethylen) |
| 密封件（材料）: | PTFE（聚偏二氟乙烯） |
| 阀座（材料）: | 不锈钢 |
| 流量（最高升/分钟）: | 175 |
| 交付量（至mWS）: | 80 |
| 固体（最大ømm）: | 6,0 |
| 输送介质温度（最高℃）: | 100 |
| 粘度（高达mPas）: | 10000 |
| Ansaughöhe trocken (bis max. mWS*): | 4,5 |
| Luftdruck (max. bar): | 8 |
| Luftdruck Anlauf (min. bar): | 2 |
| Schalldruckpegel ( in dB(A)): | 80 |
| Verdrängung pro Kammer ( in cm³): | 220 |
| Verdrängung pro Zyklus ( in cm³): | 440 |
| 大小: | 1" |
| Lufteinlass (Zoll) innen: | 3/8" |
| Druckstutzen (Zoll) innen: | Tri-Clamp 1 1/2 |
| Saugstutzen (Zoll) innen: | Tri-Clamp 1 1/2 |
| Anschluss: | Tri-Clamp |
| 证明: | FDA-konform |
| 类型: | DMP 1" SST PURE SS/PTFE |
*最大流量是在约20°C温度下用水在测试台上测量。测量在泵出口处进行，不带软管、喷枪或流量计。使用时可达到的扬程通常更低，这取决于具体应用、介质特性和泵的配置。扬程还取决于泵的设计、马达和介质情况。 粘度值是用油测定的。 ** 测试集成：介质：水/柴油，正流向，流量计前后沉降0.2m
